Overview
NetOp's QoE (Quality of Experience) monitoring measures the actual end-user experience for business-critical applications traversing SD-WAN links. Rather than alerting on raw metrics individually, QoE combines latency, jitter, and packet loss into a single composite score that reflects real application performance.
QoE Score
QoE is scored on a scale of 1 (Poor) to 5 (Best):
| Score Range | Quality Level |
|---|---|
| Below 3.1 | Poor |
| 3.1 – 3.6 | Low |
| 3.6 – 4.03 | Medium |
| 4.03 – 4.34 | High |
| Above 4.34 | Best |
How QoE is Calculated
NetOp monitors the SLA policy profiles defined on your SD-WAN firewall. For each SLA profile (e.g., SLA_Office365, SLA_AWS, SLA_Zoom), it measures:
- Latency — round-trip time to the SLA destination
- Jitter — variation in latency
- Packet Loss — percentage of packets dropped
These three metrics are combined algorithmically per application type to produce the QoE score.
Configuring QoE in NetOp
- Go to Settings → QoE
- The left pane shows all discovered SLA profiles on your firewalls
- For each profile, select the appropriate Traffic Type from the dropdown:
| Traffic Type | Examples |
|---|---|
| ISP Gateway | ISP health check ping |
| Web Browsing | SaaS apps, general web |
| Office365, Gmail | |
| Video/Voice | Zoom, Teams, Webex |
| ICMP | ICMP-based probes |
| Ignore | Exclude from QoE calculation |
Selecting the correct traffic type ensures NetOp applies the right QoE thresholds and baselines for that application's sensitivity.
SLA Profiles
SLA profiles are configured on the SD-WAN firewall (e.g., FortiGate, Palo Alto Prisma, Velocloud). When you define an SLA profile on the firewall, NetOp automatically discovers and begins monitoring it — no manual entry required in NetOp.
To add new SLA profiles, configure them on the firewall device and NetOp will pick them up on the next sync.
VPN QoE
VPN tunnel QoE uses the same composite metric (latency + jitter + packet loss) applied to VPN tunnel endpoints. The VPN Graph Topology view shows VPN link status and traffic in real time.
Alerts and Incidents
QoE anomalies are raised when a profile's composite score drops below the configured threshold for the selected traffic type. These anomalies are correlated into incidents automatically.
Best Practices
- Configure SLA profiles for all business-critical applications on your SD-WAN.
- Assign the correct traffic type — "Video/Voice" has tighter thresholds than "Web Browsing."
- Monitor QoE trends weekly to detect gradual ISP degradation before users complain.
Comments
0 comments
Please sign in to leave a comment.