Overview
The Operations module provides visibility into periodic device synchronization and enables intent-based network automation across multiple sites simultaneously.
Accessing Operations
- Open the Dashboard → Customers Table
- Click a customer name
- Click Operations from the left menu
Tabs in Operations
| Tab | Description |
|---|---|
| Intents Log | History of synchronization and automation jobs |
| Changes Log | Configuration changes detected on devices |
| Backup | Device configuration backups |
Periodic Synchronization
NetOp performs automatic daily synchronization with your network devices to refresh the asset inventory, topology, and configuration data.
Enabling Periodic Sync
- Click Periodic Sync
- Toggle Sync On
- Set repeat frequency: Daily, Weekly, or Monthly
- Set the time (e.g., 22:00)
- Click Sync
It is strongly recommended to enable daily synchronization to keep asset and topology data current.
Manual Sync
Click Sync Now to immediately synchronize all sites for the selected customer. The results appear in the Intents Log tab, showing success/failure counts per site.
Changes Log
The Changes Log provides a full audit trail of configuration changes detected on your network devices:
- VLANs added, modified, or removed
- SSIDs added, modified, or removed
- Device firmware changes
- Interface configuration changes
This is invaluable when troubleshooting incidents caused by configuration changes. You can correlate an incident's start time with a configuration change in the Changes Log to identify change-induced issues.
Fabric Operations
The Fabric Operations button opens a chatbot-style automation interface. It allows you to execute intent-based configuration operations across multiple sites simultaneously.
Examples of operations:
- Push a new SSID to all sites
- Update a VLAN across multiple switches
- Apply a firewall policy change
Operations are tracked in the Intents Log with status (Success/Failure) per site.
Best Practices
- Enable daily periodic sync for all customers immediately after onboarding.
- Review the Changes Log weekly to detect unauthorized configuration changes.
- Always check the Changes Log when investigating a new incident that correlates with a configuration change time.
- Use Fabric Operations for multi-site changes to ensure consistency and maintain an audit trail.
Comments
0 comments
Please sign in to leave a comment.